Sunday, February 26, 2017

Water Purification Process - 3 Major Steps Required to Remove Drinking Water Contaminants

By Larry Fletcher

The water purification process may seem complicated at first, but it's really not rocket science. Basically, there are three major steps that need to be included when you explain water purification.

First, an effective water purification process should remove parasites, such as giardia and cryptosporidium. In the early stages of their life cycles, they are referred to as oocysts or simply cysts. They are present in over 88% of all sources.

Infection with either causes diarrhea and other flu-like symptoms. When you explain water purification to children, you should mention that drinking from a mountain stream is no longer safe. You might also want to mention that the standard water purification process cannot remove cysts, which is why you have a micron filter on your tap.

The second thing that a water purification process should do is remove chemicals and heavy metals. The public water purification process can handle the heavy metals such as lead that are present in the source. But, there is no guarantee that the composition of the pipes does not cause contamination after it leaves the facility.

As for chemicals, well, you need activated granular carbon and a multi media block to remove all of them. This water purification process also gets rid of bad taste and odor.

The third thing that an effective water purification process must address is bacterial and viral contamination. At this, the public utilities are very effective. They use UV radiation and chemicals to disinfect and kill practically any living thing that could inhabit the water-supply.

The problem is that numerous studies have shown that drinking chlorinated water increases your risks of developing cancer. Other chemicals may be used. But, all of them create a by-product that is referred to as THM, another carcinogen.

So, when you explain water purification, you need to remember to mention that the public utilities protect us from most waterborne illnesses. We protect ourselves by removing the substances used for this purpose and the by-products of the disinfection step.

All home systems are not created equal. Many only remove chlorine and odor, because only carbon filtration is employed. Others remove trace minerals that are good for your health, but cannot remove chemicals. Still others disinfect, a process already completed by your public utility, but also de-mineralize and still do nothing about chemical contaminants.

The best water purification process for the home is one that combines carbon filtration, multi-media blocks and ion exchange. As H20 passes through, it is cleaned of chemicals, traces of heavy metals, chlorine, THMs, cysts and the mineral content, as well as the pH level are properly balanced for better health.

Usually, when we explain water purification to the kids, we explain that there is much that we can do to help. Never throw trash out the window or in the lake. Any pollutant in the environment eventually ends up in groundwater.

Always make an effort to volunteer for clean-up programs and use an effective water purification process on your faucets to remove anything that is missed by the treatment facilities. We are hoping they will become more conscious of their environment.

Larry Fletcher is an avid proponent of water purification and a passionate researcher on its health benefits. To get the facts on how to choose the best water purification system, visit now.

Article Source:

Sunday, February 5, 2017

The Dangers Of Unfiltered Well Water


Every person needs to know that there are downsides to having well water supplied to your home. If you have well water and you do not have it filtered, you probably need to. If it is filtered, you want to make sure that the filter is clean before you drink or use it because contaminants can be in the water. Harmful bacteria found in unfiltered well water can cause problems with your health, and you can end up sick because of it. The bacteria that can be in it is E-coli, Coli form, and other various bacteria and germs that are very dangerous to you. This is why you have to have filters for your well so that these things will not get up to your house and run in your faucets.

These bacteria can come from your septic tank, sewer system, dead animals, and farm waste; because the bacteria seeping into the ground can get into your well water. You have to watch out for this, so that it does not contaminate you and your family. You also have to watch out for other things that can get in the water; you can not see them, but they can be there and they are very dangerous. These things are iron, sulfur, arsenic, and lime. They are minerals that can get in the well and get in the water that you drink and wash with.

You will want to change the filters as often as recommended so unwanted bacteria will not get to your water. If your well water tastes funny or looks funny, you will need to get it tested. Do not drink or use it until the water professionals look at it and test it. You will also need to get it tested if you have had a flood or if your have just bought a house that has well water. It is good to also get filters for your faucet as well so it will be filtered twice before the water gets to your family. This means being double sure of the safety of everyone in your home.

To clean or treat well water, you can use chlorine bleach, but you have to use the right amount and should be added regularly as recommended by your local water treatment facility or health department. It really is better to have the professionals do it, they know how much to use so it will not have a negative effect on you or the water. Too much can do damage and can harm you. You need to keep your family safe from these things and that is why you have to take precautions when it comes to well water.

About the Author

Aydan Corkern is a writer an you can visit his sites for more information:
water damage baltimore and fire damage restoration baltimore .