Saturday, November 24, 2018

Uncover the Truth About Drinking Water Purification Systems

By Juanita Ruby

By definition, drinking water purification systems should remove contaminants. In order for a drinking water purification system to be complete, any contaminant should be targeted. The problem is this becomes complicated. When we rely on the treatment facilities to protect our health, we could be exposing ourselves to any number of chemicals, bacteria and other infiltrates.

If we turn to bottled water, we will spend more money than we need to and add to the pollution in the environment, while wasting more natural resources than necessary.

The best solutions are home drinking water purification systems. They allow us to have a healthy drink, right from the tap or bottle our own, if we want, without contributing to the environmental issues that we face in our world today.

When you go shopping for drinking water purification systems, you have to use caution. Just because something claims to provide purity does not mean it is a drinking water purification system.

Most companies use the word "pure" to describe their product because it appeals to consumers. It just sounds good. The word is used in advertising everything from hand soap to food products.

Some of the most expensive home drinking water purification systems on the market today were never meant for home use. Reverse osmosis or RO, for example, is used in many treatment facilities, industries and for desalination. In most homes, it is a waste of money, time, energy and groundwater. For every one gallon that it cleans as many as five gallons become wastewater. It requires electricity to run the pumps and for pressurization. It removes nearly all trace minerals, as it would salt, and in order to make the resultant healthy to drink, a re-mineralization step must follow. There are better, more affordable choices.

A home drinking water purification system should remove chlorine, as well as the harmful byproducts of chlorination known as THMs. Many products address the former, but not the latter. It is illogical, because if chlorine is present, so are THMs. But, since you cannot taste or smell them, chlorine filters make you think you are safe. THMs are known to be cancer causing and their presence is limited by the Environmental Protection Agency, but most feel that those regulations are not stringent enough.

Home drinking water purification systems should remove lead and other toxic metals. It takes either RO or a multi-media filter to trap them. In many cities around the country, the pipes that run from the street to your home are old. They were made of lead-lined copper and lead was used at the solder joints. That lead is seeping into public water and can come through your tap, unless you have a drinking water purification system that can capture it.

If you want to be sure, you can have your water tested by an independent laboratory. Since the problem is not at the facility, but between the facility and your home, there is no way for the public water facility to test for it. For simplicity and because lead content can change over time, you can just make sure to get a drinking water purification system that is certified to remove lead.

There are many other things that home drinking water purification systems should remove. Some are VOCs, MTBE, pesticides and herbicides, as well as microscopic cysts. In order to capture all of these things, you need a multi-phase system with activated carbon and a multi media block. An ion step is also advisable for balancing mineral content and pH level.

Article Source:

The Whole House Water Purification System

Saturday, November 17, 2018

[Anti Scaling Water Systems] Provide Cleaner Water

Scale can form on heating elements and the hardware and pipes of plumbing systems. Anti scaling water systems accelerate the magnesium and calcium minerals into particles that are harmless. Water enters the conditioner tank and is pulled through the agent transforming it into inactive crystal particles. These particles make their way through plumbing without attaching. This results in a 99 percent improvement in scale prevention. It prevents corrosion by adding a protective layer to the surface of the pipes and hardware and is maintenance free.

Compared to classic softeners that work on the basis of ion exchange, calcium and magnesium ions are exchanged with an equal amount of sodium ions, which adds sodium content. This raises environmental and health concerns and requires back washing. With this system you do not have the expense of buying salt and the particles generated are harmless to the environment.

Traditional softeners can be replaced with the anti scaling system. There will be no slippery feeling as is felt with softeners and there may be a slight salty taste and odor until the existing softener is completely removed. Pipes will be cleaned and calcium and scale build-up will not occur.

If the system becomes contaminated it can be treated with 2 to 3 ppm of chlorine for short periods to kill bacteria. The system will tolerate 140 degrees Fahrenheit or 60 degrees Celsius. It can withstand temperatures of 39 degrees F and should be kept from freezing. It works best in the range of 6 to 9 pH.

Minimally the life of the system is 3 to 5 years if recommended chemistry and sizing requirements are followed. Well water, if left untreated, can be a concern as it has a high level of interference ions. Municipal sources often meet requirements but high levels of chlorine, over 2 ppm, can interfere with the life of the system.

It is recommended a whole house carbon filter be installed prior to the anti scaling system if chlorine is present. Depending on the type and amount of scale build-up it can take from one to six weeks for de-scaling to take full effect. Due to high temperatures in a dishwasher, spotting can be seen on dishes due to descaling taking place. It is recommended that a cup of white vinegar be run through the wash cycle to remove the scaling. Also reduction of soap usage by as much as half and using eco-friendly detergents is advised.

The conversion of magnesium and calcium in existing pipes can be accomplished in as fast as two seconds. The reaction is immediate and particles are formed on the surface. It meets NSF 61 standards which is an independent test that effects health and is performed by Water Quality Assurance labs. Having too much chlorine will have a serious effect on the system so a carbon filter should be installed as part of the treatment system installation.

A major advantage of anti scaling water systems are that they require less servicing and maintenance. They require no salt or service calls to check for efficient operation. They require no electricity or valves, keeping costs at a minimum. As they require no salts or chemicals they discharge no brine. They do not require electricity and therefore keep energy costs low. There is no back washing required and therefore no wasted water. They use up to 50 to 70 percent less space than conventional softener systems and allow healthy minerals, magnesium and calcium to remain.

This article was prepared by Paul Nerrad on behalf of Best Water Purification [].

Article Source:

If your water source has minerals such as iron, rust, calcium, or magnesium in it, you may be damaging your dishwasher, hot water tank, and plumbing every time you use it. We also offer installation, sales, and services of the following water treatment solutions for these issues:

Chlorination systems
Hydrogen peroxide systems
Ultraviolet filters and filtration systems
Ultrafiltration systems
Reverse osmosis systems
Carbon filters
Sediment filters

Call us Today! 315-727-4644 or 315-636-8211 or Contact Us Today

Saturday, November 3, 2018

The Whole House Water Purification System

By Laurel Tevolitz

Not every homeowner has a sound sleep when he or she has purchased only a point of use system for purification of the home's tap water. A homeowner often chooses to purchase a whole house water purification system. Why would a homeowner feel the need to get one of these systems?

Such a system connects to the main water line, the line going into the home. Generally, that connection falls at point where the line splits, sending some of the water to a hot water heater. The cold water enters the water purification system.

When a homeowner has invested in one of the whole house water purification systems, then the residents of the house enjoy the easy availability of clean drinking water. They also know that pure water can be obtained at taps in the kitchen, laundry and bathroom. The system can have a number of optional features.

Any one of the whole house systems might include a process for softening the water. It might include a process for removing iron from the water, or for filtering the water. The purification system can be designed to filter well water, or it can have the ability to filter city water. A home system that takes chlorine out of the water gives the residents great tasting water.

Sometimes when a homeowner studies the available whole house water purification systems, he or she has a question. A number of Homeowners have asked whether or not a system can be used to send pure water into the garden hose. Homeowners who have that question need to study a blueprint of their home.

The water line that goes into the home could come from the city's main line. The homeowner then needs to discover where the branch from the mainline splits into a "house" line and a "yard" line. Having discovered the point of that split, the homeowner can determine whether or not a whole house water purification system would provide the garden flowers and lawn grass with pure water.

Should any homeowner decide to purchase one of these systems, he or she should know what to look for. That homeowner needs to look for one with a money back guarantee. Such a system should also offer a full year of warranties on the system parts, and a 25 year warranty on the system housing.

In addition, a homeowner should keep in mind the degree to which the materials in the purification system might alter the composition of the water. A homeowner in the U.S. should make a point of buying one that contains only materials that have received the approval of the Federal Drug Agency (FDA).

The most common complaint that homeowners get from residents in a home concerns the taste of the water coming from the tap. In order to provide residents of a home with good-tasting water, a homeowner must arrange for chlorine and hydrogen sulfide to be removed from the water.

A good whole house water purification system can carry-out such a removal. Complaints from residents in the home can be the biggest push on a homeowner, driving him or her to purchase a system.

Such a push has encouraged many homeowners to purchase a purification system that has activated carbon filters with ion exchange and micron filtration. Homeowners know that with such a system in place they can feel confident that all residents in the home have access to safe water.

Discover why you need a whole house water purification system in your home.

Laurel Tevolitz is a dedicated researcher of critical issues that affect health and well-being.

Article Source: