By Penney Hoppe
Drilling a well for water supply is one of the concerns faced by the homeowner and home builders. This is because there are several considerations needed to ensure that you can have a good water quality for your home.
Prior to drilling a well, it is recommended that the water from the ground source be tested first to assure quality and safety of water. Aside from this, you also need to check the regulation of your area regarding the ownership of a private well.
Choosing the Site for Water Well
The performance and safety of your well will rely on your choice of its location. When inspecting different sites, you have to make sure that the possibility of having a future development plan in your property is considered. This is because once the well is drilled; you can longer make any development on that site.
Contaminants often enter the well on top of the casing or around it from the outside. Sewage and other contaminants could seep into the upper ground surface layers to the water table or aquifers.
The following factors can help to avoid the possible water contamination in your well.
- The well should be accessible for monitoring, testing, cleaning, repair and maintenance.
- The well location should be up-slope to prevent potential contaminants such as septic systems, from seeping into the aquifer.
- The surrounding ground of the well is also sloped away to avert surface water runoff
- The well should not be situated in a well pit.
Filtering Well Water
Well water, unlike city and municipal water, is drawn direct from the ground and does not pass through any filtration system before it can be consumed. Filters are not just used for removing viruses and bacteria from your well water supply, but also to trap the sediments which could be present in the water and pose a serious problem in your water source. When water is unfiltered, it can result to bad smell and taste.
There are several water filtration systems for well waters; however, if you want to get best results go for those that have multiple filters such as carbon filters. The system could be installed in several locations like at the pump itself, under the sink, at the entry point of water in your home, or in countertop. Doing a bit of research can help you in finding the right filtration system for your well water.
Anyone who has a well for his water supply should have a filtering system installed. This is to make sure that no harmful contaminant will infect the liquid. Water from well may contain pathogens that can trigger serious ailments.
You can have your well water periodically tested or just install a reliable filtration system to eliminate the harmful particles without removing the important minerals needed by the body. Installing water is a more economical option than having the water tested every now and then.
Benefits of Well Water
Health Benefits - well water can be filtered without the need of chemicals like chlorine. This will provide the health benefits without the added chemicals that can possibly harm the body.
Consumption and Taste - water from well is known to have softer taste compared to the city and municipal water. Unlike the water treated with chemicals, well water is softened naturally. Soft water from well can add to its refreshing taste.
Environment friendly - the filtration systems installed for well water are a lot more eco-friendly compared to the water treatment plants where the water supply for urban areas come from. Using well water reduces the use of pollution caused by chemicals and pollutants from treatment plants.
Financial Benefits - installing water well for your private use can make you eligible for various tax breaks, aside from being freed from water usage feed. Installing a well is also a long-term investment unlike when you rely on city water service wherein you will receive a monthly bill.
Visit my website to find out more about Well Water Filter Systems [http://wellwaterfiltersystems.com/].
Water Treatment For Residential Areas
Most of the residences get heir supply of water from municipal systems of water. A few of the homes use private water sources for their water. If you are using a private well or other private source that is not a public water supply, you are responsible for maintaining clean and safe water for your family to use. These private water sources are not regulated by the state and local standards that are applied to the municipal water sources.
The problems that you can face as an owner of a private will can be very big. Most of the things that you will find in well water are natural for the water and do not usually because any health concerns. You can, however, find some toxins that have been introduced into the water supply that can be dangerous to drink and also for humans to use. To make sure that your family is safe from the contain microorganisms in the water you drink, you will need to provide them with a water treatment system for residential use.
What does a residential water treatment system do?
A water treatment system that is designed for residential use completes a process of ridding your water of contaminants that it may have in it and thereby making it safe for drinking by you and your family.
Each of the water treatment systems for use in residences vary greatly. Some only get rid of certain substances in the water. Other systems can only provide relief from problems like hard water and does nothing to get rid of the toxic contaminants in the water.
Installation of these residential water treatment systems are also each different than the other. When you are talking about the installation of these water treatment systems you are coming into two different categories. They are the point of entry and the point of use device. The two vary by the amount of protection they give each home from contaminants.
The point of entry device treats all the water that is coming into the home. This gives each faucet clean water that is ready to be used. The point of use device focuses on the water that is flowing from one faucet only.
How To Buy Residential Water Treatment Equipment
When you are in the market to purchase a residential water treatment system, you will need to find out exactly what is in your water so you will be able to find the right equipment to remove those things.
You may have a hard water problem. Your water is full of high amounts of minerals like magnesium and calcium. Hard water will make it very difficult to wash clothes. The chemicals also create deposits on your pipes that will cause the water flow to be reduced. You will need to provide your home with a water treatment system that will deal with this problem only.
Your private well might be close to a sewage or disposal area like a septic tank. You might be concerned that the contamination from this area may cause your water to be unhealthy. Some of the waste from this area could go into your drinking water. You will need to focus on the main issue and that is to rid the water of microbial contamination. You will want to purchase a water treatment system for residences that will remove bacteria, fungus, parasites, and viruses.
Does your water taste odd? Do you need well water pump or treatment services? For all water treatment services "Look No Further, Look to Amber Pump & Water Treatment, LLC" Call 315 636-8211 or 315 727-4644 Bryan Wolf in the Syracuse, New York area & CNY residential and commercial service.
Well Water Treatment